Samsung EC-NV7ZZBBA/PT, EC-NV7ZZBBC/DE manual Continuous shot, Metering, Single, Multi, Spot

Models: EC-NV7ZZBBB/IT EC-NV7ZZBBE/E1 EC-NV7ZZBBC/E1 EC-NV7ZZBBB/RU EC-NV7ZZBBC/RU EC-NV7ZZBBR/E1 EC-NV7ZZBBA/IT EC-NV7ZZBBC/E2 NV7 EC-NV7ZZBBJ/AS EC-NV7ZZBBA/SP EC-NV7ZZBBA/AS EC-NV7ZZBBA/FI EC-NV7ZZBBB/FR EC-NV7ZZBBA/IL EC-NV7ZZBBC/DE EC-NV7ZZBBA/GB EC-NV7ZZBBB/SP EC-NV7ZZBBB/E2 EC-NV7ZZBBA/DE EC-NV7ZZBBA/PT EC-NV7ZZBBA/FR

1 82
Download 82 pages 22.07 Kb
Page 31
Image 31

Continuous shot

You can select the type of shooting and the number of continuous shots.

- SINGLE

: Take one picture only

 

- CONTINUOUS : Images will be taken continuously

AEB

M. CAPTURE

 

until the shutter button is released.

 

HIGH SPEED

 

The shooting capacity depends on

CONTINUOUS

 

the memory.

SINGLE

 

7

- HIGH SPEED

: This takes 3 shots continuously

 

 

(2.5 shots per second) when the

 

 

shutter is pressed and held down.

[Still image mode]

- M. CAPTURE

: This takes 7.5 shots per second, when the shutter is pressed

 

and held down. After completing the continuous shooting,

 

images are saved and the images play back on the Rear

LCD. The maximum number of shots is 20 and the image size is fixed as 1024X768.

-AEB : Take three pictures in a series using different exposures: standard exposure, short exposure (-1/2EV) and over exposure (+1/2EV). Use this mode if it is hard to decide exposure of the object.

High resolution and picture quality increases file saving time, which increases stand-by time.

If the [CONTINUOUS], [HIGH SPEED], [M. CAPTURE] or [AEB] sub menu is selected, the flash is switched off automatically.

It is best to use a tripod for the AEB shooting as the time to save each image file is longer and blurring caused by camera shake may occur.

When the [M.CAPTURE] menu is selected, you only can select ISO 400, 800, 1000.

Metering

If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.

- MULTI

: Exposure will be calculated based on

 

 

an average of the available light in the

 

 

image area. However, the calculation

MULTI

 

SPOT

 

will be biased towards the centre of the

 

CENTER

 

image area. This is suitable for general

 

7

 

use.

 

- SPOT

: Only the rectangular area in the centre

[PROGRAM mode]

 

 

of the LCD monitor will be metered for

light. This is suitable when you want the subject in the centre correctly exposed, regardless of the back lighting.

-CENTER : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for taking a picture of small object like a flower or insects.

If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation.

30

Page 31
Image 31
Samsung EC-NV7ZZBBA/PT, EC-NV7ZZBBC/DE, EC-NV7ZZBBA/FR, EC-NV7ZZBBB/E2 manual Continuous shot, Metering, Single, Multi, Spot