Samsung EC-NV7ZZBBA/SP, EC-NV7ZZBBC/DE Selecting focus type Flash, Manual Focus MF, Auto macro

Selecting focus type

Flash

INFORMATION

When the macro mode is selected, it is possible that camera shake will occur. Take care not to shake the camera while taking a picture.

When you take a picture within 20cm in the Macro mode, select the FLASH OFF mode.

You can select the flash type in accordance with the subject distance.

The distance ranges are show below.

When using the ASR, Continuous shot, High Speed Continuous shot, Motion Capture, AEB, Movie clip mode and Still image mode (except the NIGHT, PORTRAIT and CHILDREN mode), the flash will not operate.

AUTO

RED EYE

FILL IN

SLOW SYNC

OFF

7

Manual Focus (MF)

Where the automatic focusing is not available, for example, in very dark conditions, use the manual focus. Please be careful when using the manual focus as the picture can be blurred easily.

You can use the manual focus in the program mode and ASM mode.

How to set the manual focus

To set to manual focus, touch the button and slide your finger to the left or right.

￿￿￿￿ ￿￿￿￿ ￿￿￿￿ ￿￿￿￿ ￿￿￿￿￿	￿￿￿￿ ￿￿￿￿ ￿￿￿￿ ￿￿￿￿ ￿￿￿￿￿
[Farther focus]	[Closer focus]

When Super macro is selected, the flash is automatically switched off.

Flash range (W : Wide, T : Tele)			(Unit : m)
ISO	Normal	Macro	Auto macro
AUTO	W: 0.8 - 5.8	W: 0.2 - 0.8	W: 0.2 - 5.8
	T: 2.0 - 4.0	T: 0.6 - 2.0	T: 0.6 - 4.0

INFORMATION

If you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash).

Do not move the camera until the second flash fires. Using the flash frequently will reduce the life of the battery.

Under normal operating conditions the charging time for the flash is usually less than 5 seconds. If the battery is weak, the charging time will be longer. Take photographs within the flash range.

The image quality is not guaranteed if the subject is too close or highly reflective. When taking an image in poorly lit conditions with the flash, there may be a white speck in the captured image. The speck is caused by the reflection of the flash light from the atmospheric dust. It is not camera malfuction.

Do not open the Built-in flash by force. It may cause damage to the flash.

28