Starting the Multi Slide Show ( )
Selecting Images
You can select image to view |
Configure Multi Slide show effects
Unique screen effects can be used for the Multi Slide Show.
1. Use the Up / Down buttons to select the | Start |
| |
[Images] menu and press the Right button. | Images | All :All | |
2. Select a desired sub menu by pressing | Effect | Date:Off | |
Interval | Select:1 sec | ||
the Up / Down button. | Music | :Off | |
|
| ||
[All] | : All images saved in the |
|
|
| Memory are played back. |
|
|
| Back | Set | |
|
|
| |
| Press the OK button to save the configuration. |
| |
[Date] | : Images taken in a specified date are played back. | ||
Press the OK button to save the configuration. [Select] : Play only the selected images. The selected image
can be saved as [Select1], [Select2] and [Select3]. If you save the selected image with the [New Select] command, it will be saved as [Select1]. But when a new image is saved again using [New Select], the former image which had been saved as [Select1] will be saved as [Select2] automatically.You can change and cancel the images which were saved as [Select1], [Select2] and [Select3]. Press the Fn button to save the configuration.
3.Select [Play] or [Repeat] in the [Start] menu to start the multi slide show.
1.Select the [Effect] sub menu by press- ing the UP / DOWN button and press the RIGHT button.
2.Use the Up / Down button to select the type of effect.
3.Press the OK button to confirm the setting.
Start
| Off |
Images | :All |
| Calm |
Effect | :Off |
| Sweet |
Interval | Rural:1 sec |
Music | Vivid:Off |
| Lively |
|
|
Back | Set |
71