LCD brightness
You can adjust the LCD brightness.
Adjusting LCD Brightness
1.Rotate the mode dial to SETUP mode and the [SETUP 1/3] menu will display.
2.Select the [SETUP 3/3] menu by pressing the LEFT/ RIGHT button.
3.Select the [LCD] menu by pressing the UP/ DOWN button and press the RIGHT button.
4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
-[LCD] sub menu :
|
| SETUP 3/3 | ||
|
|
|
|
|
| LCD | NORMAL |
|
|
|
|
|
| |
|
|
|
|
|
| BACK: |
| SET:OK | |
Selecting Video out type
The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.
Setting the Video Out Type
1.Rotate the mode dial to SETUP mode and the [SETUP 1/3] menu will display.
2.Select the [SETUP 3/3] menu by pressing the LEFT/ RIGHT button.
3.Select the [VIDEO OUT] menu by pressing the UP/ DOWN button and press the RIGHT button.
4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
-[VIDEO OUT] sub menu : NTSC, PAL
Connecting to an external monitor
In RECORDING/ PLAY mode, you can view the stored still images or movie clips by connecting the camera to an external monitor via the A/V cable. When the camera is connected to an external monitor, the LCD monitor will be turned off automatically.
SETUP 3/3
VIDEO OUT
NTSC
PAL
BACK:
SET:OK
Yellow color - Video
White color - Voice
64