Samsung EC-SH100ZBPSSA, EC-SH100ZBPRE1 manual Sending photos or videos to a Blu-ray disc Player

Using Auto Backup to send photos or videos

Sending photos or videos to a Blu-ray disc Player

You can send photos from your camera to the Samsung Blu-ray disc player that has an HDD.

1 On the Home screen, touch .

2 Touch to connect to the AP.

•Select the AP that is connected to the Blu-ray player.

3 Search for available devices, and then select your Blu- ray player.

4 When the camera is connected to the Blu-ray player and a pop-up appears on the player's display, select Allow.

5 On the Blu-ray player, select Menu “ Settings “ Network “ AllShare Server Management “ Device Access Control “ your camera. Then, set the Blu-ray player to be accessible by other devices.

•The Blu-ray player will remember the most recent access settings. If the connection conditions are the same as the last connection, the camera will automatically access the Blu-ray player.

6 Touch Confirm to send files.

•Transferred files will be stored on the hard disk of the Blu-ray player.

•Before you backup the files, connect the Blu-ray disc player to a wired AP. Select Menu “ Settings “ Network “ Network Setting to view the player’s IP allocation.

•Even when you have set the Blu-ray player to be accessed by other devices, you may be prompted to change the access setting again. To set the access setting, refer to steps 4 – 5.

•This feature works with Samsung Blu-ray players that support Auto Backup.

•The Auto Backup function cannot be used when the Blu-ray player is:

-playing back files or access to browser, in My Contents or My Device menu

-upgrading the software

-recording files or time-shifting files (reservation recordings will function normally during automatic backups.)

-formatting the player's hard disk or when you are testing the device or its capabilities

Wireless network 124