Samsung EC-WB2200BPBE2, EC-WB2200BPBFR Using Samsung Link to send files, Select → Nearby devices

Using Samsung Link to send files

You can view files on a Samsung Link device connected to the same AP.

Viewing photos or videos on devices that support Samsung Link

1Rotate the mode dial to .

2Select → Nearby devices.

•If the guide message appears, select OK.

•The camera will automatically attempt to connect to a WLAN via the most recently connected AP device.

•If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p. 108)

•You can set to allow only selected devices or all devices to connect by pressing [m], and then selecting DLNA Access Control on the screen.

•A sharing file list is created. Wait until other devices can find your camera.

3Connect the Samsung Link device to a network, and then turn on the Samsung Link feature.

•Refer to your device's user manual for more information.

4On the camera, allow the Samsung Link device to connect to your camera.

5On the Samsung Link device, select a camera to connect to.

6On the Samsung Link device, browse the shared photos or videos.

•For information about searching for the camera and browsing the photos or videos on the Samsung Link device, refer to the device's user manual.

•Videos may not play smoothly depending on the type of Samsung Link device or the network condition. If this happens, re-record the video in (640 X 480) or smaller quality and play it again. If videos do not play smoothly on your device over the wireless connection, try connecting the camera to the device with an A/V cable.

AP

The camera is connected to a TV that supports Samsung Link via WLAN.

Wireless network 122