Samsung EC-WB1100BPBUS Connecting to a Wlan and configuring network settings, Select an AP

Connecting to a WLAN and configuring network settings

Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.

Connecting to a WLAN

1Rotate the mode dial to .

2Select , , or .

3Follow the on-screen instructions until the Wi-Fi Setting screen appears.

•The camera automatically searches for available AP devices.

•In some modes, press [m], and then select Wi-Fi Setting.

4Select an AP.

Wi-Fi Setting

Refresh

Samsung 1

Samsung 2

Samsung 3

Samsung 4

Back Manual

•Select Refresh to refresh the list of connectable APs.

•Select Add wireless network to add an AP manually. The AP name must be in English to add the AP manually.

Icon	Description
	Ad hoc AP
	Secured AP
	WPS AP
	Signal strength
	Press [t] to open network setting options.

•When you select a secured AP, a pop-up window appears. Enter the required passwords to connect to the WLAN. For information about entering text, refer to "Entering text". (p. 96)

•When a login page appears, refer to "Using the login browser". (p. 94)

•When you select an unsecured AP, the camera will connect to the WLAN.

•If you select a WPS profile supported AP, select→ WPS PIN connection, and then enter a PIN on the AP device. You can also connect to a WPS profile supported AP by selecting → WPS button connection on the camera, and then pushing the WPS button on the AP device.

•If a pop-up message about data collection regulations appears, read and agree to it.

Wireless network 93