Samsung EK-GC100ZWAATT user manual Low Battery Indicator

1.Remove the plastic cover, then plug the flat end of the Travel Charger into the Power/Accessory Interface connector and the other end into a standard AC wall outlet.

2.When charging is finished, remove the flat end from the interface connector jack on the camera.

Important! If your handset has a touch screen display, please note that a touch screen responds best to a light touch from the pad of your finger. Using excessive force or a metallic object when pressing on the touch screen may damage the tempered glass surface and void the warranty. For more information, refer to “Standard Limited Warranty” on page 155.

Note: Failure to unplug the wall charger before you remove the battery, can cause damage to the camera.

Low Battery Indicator

When the battery is weak, the battery icon ( ) blinks and the device sounds a warning tone at regular intervals. In this condition, your camera conserves its remaining battery power, not by turning off the backlight, but by entering the dimming mode. For a quick check of your battery level, glance at the battery charge indicator located in the upper- right corner of your device’s display. Solid color ( ) indicates a full charge.

9