Samsung EK-GC100ZWAATT Manually Scan for a Wi-Fi Network, Wi-Fi Status Indicators, Wi-Fi Direct

Note: Use of wireless data connections such as Wi-Fi and Bluetooth can cause an added drain to your battery and reduce your use times.

Manually Scan for a Wi-Fi Network

1.From the Home screen, tap ➔ Settings ➔ Wi-Fi.

2.Tap Scan.

All available Wi-Fi networks are displayed.

Wi-Fi Status Indicators

The following icons show your Wi-Fi connection status at a glance:

Displays when Wi-Fi is connected, active, and communicating with a Wireless Access Point (WAP).

Displays when Wi-Fi is active but there is a communication issue with the target Wireless Access Point (WAP).

Displays when connected to another device using Wi-Fi Direct. For more information, refer to “Wi-Fi Direct” on page 107.

Wi-Fi Advanced Settings

The Advanced Wi-Fi menu allows you to set up many of your device’s Wi-Fi service, including:

•Network notification when an open network is available

•Setting your Wi-Fi sleep policy

•Checking for Wi-Fi Internet service

•Automatically connecting to an AT&T Wi-Fi hotspot when detected

•Specifying your Wi-Fi frequency band

•Viewing your device’s MAC and IP Address

To access the Advanced Wi-Fi menu:

1.From the Home screen, tap ➔ Settings ➔ Wi-Fi.

2.Tap Advanced.

For more information, refer to “Advanced Wi-Fi Settings” on page 71.

Wi-Fi Direct

Wi-Fi Direct allows device-to-device connections so you can transfer large amounts of data over a Wi-Fi connection.

Note: See your service plan for applicable charges for Wi-Fi Direct.

107