Samsung EK-GC200ZWAXAR, EKGC200ZWAXAR Manually add your new network, Connection, Turning Wi-Fi On

either be Open (unsecured) as Secured (requiring knowledge password).

within most Hot Spots, or of the Router name and

Manually add your new network
1.Tap	connection
	Add Wi-Fi network.
2. Enter the Network SSID.This is the name of your

Turning Wi-Fi On
By default, your device'sWi-Fifeature is turned off. Turning
Wi-Fi on makes your device able to discover and connect to
compatible in-range WAPs.		·-~ <"'
1.	From the Home screen, tap ~J1 ~ Settings.
2.	Tap the ON/OFF slider, located to the right of the Wi-Fi
	field, to tum Wi-Fi
	ON-·
Connect to a Wi-Fi Network
1.	From the Home screen, tap ~l[H ~Settings~ Wi-Fi.
	The network names and security settings (Open
	network or Secured with WEP) of detected Wi-Fi
	networks are displayed in the Wi-Fi networks section.
2. Tap the network you want to connect to.
Note: When you select an open network, you will be
	automatically
	connected to the network.
3.	Enter a wireless password if necessary.

		Wireless Access	Point.
3.		Tap the Security field and select a security option. This
		must match the current security setting on your target
4.		WAP.
		If secured, you will also need to enter your WAP's
		password.
5. Tap Save to store the new information and connect to
		your target WAP.
Note: The next time your device connects to a previously
		accessed or secured wireless network, you are not
		prompted to enter the WAP key again, unless you reset
		your device back to its factory default settings.
Turning Wi-Fi			rr ..
		Off
1.From the Home screen, tap ff:m ~ Settings.
2.	Tap the ON/OFF slider, located to the right of the Wi-Fi
	field, to turn Wi-FiOFF

104