Samsung EKGC200ZKAXAR user manual Disconnecting a paired device, Deleting a paired device unpair

Note: Due to different		specifications			and features of other
				devices, display and operations
Bluetooth-compatible
may be different, and functions such as transfer								or
exchange may not be possible with all Bluetooth
			.
compatible devices
Note: Pairing between two Bluetooth devices is aone-time
process. Once apairing has been created, the devices
will continue to recognize their partnership							and
exchange information without having to re-enter a
passcode again.
Disconnecting a paired device
Disconnecting	apaired device breaks the connection
between the device and your camera, but retains							the
knowledge of the pairing. At alater point when you wish to
reconnect the device, there is no need to setup						the
connection information			again.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap the previously
paired device (from the bottom of the page).

3. At the Disconnect? prompt, tap OK to confirm
		.
disconnection
Note: Disconnections are manually done but often								occur
	automatically		if the paired device goes out of range								of
						off.
	your camera or it is powered
Deleting a paired device {unpair)
Deleting a device from your list removes its Itconnection
record" and upon		reconnection			would require that you reenter
					.
all the previous pairing information
1. Verify your Bluetooth is active.
2.	From the Bluetooth settings page, tap IJnext to the
	previously paired device. This opens						ttie connected
	device'smenu			options.			.
3.
	Tap Unpair to delete the paired device								device.
4. Tap Rename to change the name of the paired
5.	Tap Call audio to enable or disable call audio from									the
		.
	paired device

Connections 109