34
OPERATION
4-1-1. CLERK SIGN ON
You have to program the System option about Clerk and set up the
secret code of the Clerk before operating the Clerk function.
The system option has three types.
One is used without the Clerk function, another is the Stay down mode,
and the other is the Pop up mode.
You have to operate according to how the System option was programmed.
Two ways of operation are be available
- Stay down operation
- Pop up operation
Stay down operation requires a manual sign off.
This mode is typically used in Supermarkets where only one operator uses
the register in a time period.
Pop up operation signs off the operator automatically after each receipt.
Therefore you have to sign on the operator before operating this model.
This mode is used in restaurants or similar types of stores where servers
one after the other are using the register during the same period.
NOTE !! Refer to 3-1. SYSTEM OPTION and 3-6. CLERK.
4-1-1. CLERK SIGN ON
If the System option about Clerk is set up, operate as follows:
Then the end of display is showed the comma.
n1 n2 n3 n4 -
└─────┘ └ Clerk No.
Secret code
Example. The Secret code of Clerk 1 is 111.
You operate Clerk 1 in Stay down mode.
1 1 1 1 CLERK * 1 C O
* 1 0 0 0 0 0 5
1 5 . 2 6 3 0