Using the headset
List of voice prompts
Status | Voice prompt* | |
When you turn the | “Power on” or “Power off” | |
headset on or off | ||
| ||
When you enter | “Ready to pair. Search for the headset from the Bluetooth menu” | |
Pairing mode | ||
| ||
|
| |
When you turn the |
| |
or off |
| |
|
| |
When you connect the | “Device is connected” or “Two devices are connected” | |
headset to the devices | ||
| ||
When you disconnect |
| |
the headset from a | “Device is disconnected” | |
device |
| |
|
| |
When you reject or end | “Call terminated” | |
a call | ||
|
Resetting the headset
When the headset is paired with a mobile device, it automatically saves connection and feature settings, such as the Bluetooth address or device type of the mobile device.
To reset the connection settings saved in the headset, enter Pairing mode, press and hold both Volume buttons and the Talk button at the same time for 3 seconds. The indicator light flashes violet three times.
When resetting the headset, all connection settings saved in the headset are deleted, and the connection with mobile devices are deleted. To use the headset, pair with mobile devices again.
* Voice prompt content may vary.
17
