I cannot see the On Screen Display.
The screen shows strange colors or just black and white.
Connected using the DVI cable?
Have you locked the On Screen Display (OSD) Menu to prevent changes?
Is the screen displaying only one color as if looking at the screen through a cellophane paper?
Have the screen colors become strange after running a program or due to a crash between applications?
can handle properly.
If the display exceeds SXGA or 75 Hz, a "Not Optimum
Mode","Recommended Mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum
Mode","Recommended Mode 1280 x 1024 60 Hz" message appears for one minute and then disappears.
Please change to the recommended mode during this
(The message is displayed again if the system is rebooted.)
You may get a blank screen if you boot the system before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals.
Connect the DVI cable and then reboot the system.
Unlock the OSD by pressing the MENU/
button for at least 5 seconds.
Check the signal cable connection.Make sure the video card is fully inserted in it's slot.
Reboot the computer.
| Has the video card been set | Set the video card by referring to |
| properly? | the video card manual. |
The screen suddenly has | Have you changed the video card | Adjust screen image position |
become unbalanced. | or the driver? | and size using the OSD. |
| Have you adjusted the resolution | Adjust the resolution and |
| or frequency to the monitor? | frequency at the video card. |
|
| (Refer to the Preset Timing |
|
| Modes). |
The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.
The screen is out of focus or OSD cannot be adjusted.
Have you adjusted the resolution or frequency on the monitor?
Adjust the resolution and frequency of the video card. (Refer to the Preset Timing Modes).
LED is blinking but no images on the screen.
There are only 16 colors shown on the screen. The screen colors have
Is the frequency properly adjusted when checking the Display Timing on the menu?
Have the Windows colors been set properly?
Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.
(The maximum frequency per resolution may differ from product to product.)
Windows ME/2000/XP:
Set the colors properly at the
