Using the Steam Cleaning |
| Using the Auto Reheat Feature |
The steam provided by steam clean system will soak the cavity surface. After using steam clean function, you can easily clean the cavity of oven.
☛use this function only after the oven has completely cooled. (Room temperature)
☛Use normal water only,and no distilled water.
1.Open the Door.
2.Fill with water following guide line(water level) outside the
water bowl.
The line is about 50ml.)
3.Insert water bowl into upper water bowl holder on the right
wall of cooking chamber.
4.Close the door.
5.Press the Steam clean ( 
) button.
It can be seen MISTY during steam cleaning.
but it is not a defect BUT STEAM SHIELDS THE light
INSIDE.
6.Open the Door.
7.Please clean cavity of oven with dried dishtowel.
Remove the turntable and only under rack with kitchen paper.
Warning!
•Water Bowl only can be use during “Steam Clean” mode.
•When cooking
The Auto Reheat feature has four
EN
You do not need to set either the cooking times or the power level. You can adjust the number of servings by turning the dial knob. First, place the food in the centre of the turntable and close the door.
1.Select the type of food that you are cooking by pressing
the Auto Reheat ( 
) button once or more times.
2.Select the size of the serving by turning the dial knob.
(Refer to the table on the next page.)
3.Press the 
button.
Result : Cooking starts. When it has finished. 1) The oven beeps four times.
2)The end reminder signal will beep 3 times (once every minute).
3)The current time is displayed again.
✉Use only recipients that are
9
