Kodak C623, C623 Check the image storage location setting see, Picture or, Instead of a, Subject

Troubleshooting

If...	Try one or more the following
In Review mode,	■ Check the image storage location setting (see page 36).
you do not see a
picture (or the
expected picture)
on the LCD screen.
In Review mode, a	■ Transfer the picture to the computer (page 29), then format the card in
blue or black	the camera (see page 39).
screen is displayed	Caution: Formatting a card deletes all pictures and videos,
instead of a	including protected files.
picture.
Shutter button	■ Turn on the camera (page 2).
does not work.	■ Wait until the Ready light stops blinking red before attempting to take
	another picture.
	■ Transfer pictures to the computer (page 29), delete pictures from the
	camera (page 19), switch image storage locations (see page 36), or
	insert a card with available memory (page 3).
Slide show does	■ Adjust the camera Video Out setting (NTSC or PAL, see page 38).
not run on external	■ See the external device’s user’s guide.
video device.
Picture is too light.	■ Move so there is at least 2 ft (0.6 m) between the camera and the
	subject.
	■ Decrease Exposure Compensation (page 14).
Picture is not clear.	■ Clean the lens (see page 62).
	■ Make sure your camera is not in Close-up mode.
	■ Move so there is at least 2 ft (0.6 m) between the camera and the
	subject.
	■ Place the camera on a flat, steady surface or use a tripod.

48 www.kodak.com/go/support