62 www.kodak.com/go/support
Appendix
Extending battery life
■See Auto Power Off (see page 38).
■Limit the following activities that quickly deplete bat tery power:
– Reviewing your pictures on the LCD (see page 17)
– Using the LCD as a viewfinder (see page 7)
– Excessive use of the flash
■Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean,
dry cloth before loading batteries in the camera.
■Battery performance is reduced at temperatures below 41° F (5° C). When using
your camera in cold weather, carry spare batteries and keep them warm. Do not
discard cold batteries that do not work; when they return to room temperature,
they may beusable.
Upgrading your software and firmwareDownload the latest versions of the software included on the Kodak EasyShar e
software CD and the camera firmware (the software that runs on the camera). See
www.kodak.com/go/c653downloads or www.kodak.com/go/c623downloads.
Care and maintenance■If you suspect water has gotten inside the camera, remove the batte ry and card.
Allow all components to air-dry for at least 24 hours before using the camera.
■Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleani ng solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■Service agreements may be available in your country. Contact a dealer of Kodak
products for more information.
■For digital camera disposal or recycling information, contact your local authorities.