SyncMaster 170N/171N/172N/173N/191N/192N/193N/150N/151N/152N

Connecting Your Monitor

Installing the Monitor Driver

Setup-General

Installing VESA compliant mounting

1.Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

2.Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

3.Connect the monitor to the Macintosh computer using the D-SUB connection cable.

4.In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor.

5.Turn on your computer and monitor. If your monitor displays an image, installation is complete.

Setup-For Multimedia model (Option)

1.Connect the power cord of the multimedia stand to the multimedia stand power port on the back of the monitor.

2.Connect a sound cable from the input source (sound card,computer,CD-ROM drive).

3.To listen in privacy,connect headphones here.