Samsung GN792IFXA/XET Manopola Bruciatore, Replace parts in the correct order after cleaning

3.6 Cleaning and maintenance 3.1 Descrizione del piano di cottura

Burners

■Remove the burner caps, burner head and burner ring by pulling them upwards and away from the top plate.

■Soak them in hot water and a little detergent.

■After cleaning and washing them, wipe and dry them carefully. Make sure that the flame holes are clean and completely dry.

■Wipe the fixed parts of the burner base with a damp cloth and dry afterwards.

■Gently wipe the thermocouple and spark plug with a well wrung-out cloth and wipe dry with a clean cloth

■Make sure that the injector is not blocked before placing the burners back on the top plate.

Assemble the auxiliary, semi-rapid, rapid and wok burners as follows

	Replace the burner head (12) by ensuring that the locating tabs fit
12	into the notches in the burner base (14).
14
15
16	Place the burner head (12) on the burner ring (13) so that the
11
	thermocouple (15) and the spark plug (16) extend through their
12
	respective holes in the burner head.
13	Replace the burner cap (11) by ensuring that the locating tabs fit
14
15	into the notches in the burner base (14).
16	Replace parts in the correct order after cleaning
	■ Do not mix up the top and bottom.
	■ The locating lugs must fit exactly into the notches.
	■ Set the pan supports down vertically without sliding
	them over the spillage well.

GN952IFXA / GN952IFXAB

5 3 3 4 2

1

7

6 6 6 6 6

Manopola	Bruciatore
	(ausiliario, semi-rapido, rapido e wok)
8	12	11
9		12
	14	13
10
		14
	15	15
	16	16

1.	Vassoio di raccolta dei liquidi	9.	Anello di guarnizione
2.	Bruciatore ausiliario	10.	Rubinetto
3.	Bruciatore semi-rapido	11.	Coperchio del bruciatore
4.	Bruciatore rapido	12.	Testa del bruciatore
5.	Bruciatore wok	13.	Anello del bruciatore
6.	Manopola di controllo	14.	Coppa del bruciatore
7.	Griglia di supporto	15.	Termocoppia
8.	Manopola di regolazione	16.	Candela di accensione

GB 20 IT 13