using tools and applications

2.Select a network icon → Add and add a connection profile.

If the network you want needs an IP address, subnet mask, DNS, or gateway information, select Advanced settings.

Wi-Fi security should be set as the selected network configuration and 802.1x (EAP- TTLS, PEAP) is supported.

3.In Menu mode, select Internet or Communities, or in Idle mode, select a web-based widget.

4.Select and drag a network icon into the centre (if necessary).

Your phone connects to the network using the connected WLAN profile.

To access the internet via another method, change the connection profile to the desired method.

To connect to a WLAN using a WPS (Wi-Fi Protected Setup) access point,

1.In Menu mode, select Wi-Fi → Search.

2.Select a WPS icon () and select Add.

3.Select WPS push button or WPS enter PIN depending on the AP device type.

4.Select Start and press a WPS button on the AP device within 2 minutes.

Or, enter a PIN on the AP device and select Start within 2 minutes.

60

Page 67
Image 67
Samsung GT-B5310 manual Using tools and applications