Samsung GT-I9300BLACK user manual Placing a Call on Hold, Headset connects to a Bluetooth headset

–Tap Speaker again to use the phone’s earpiece (see “Using the Speakerphone During an Active Call” on page 55). The green line will disappear when Speaker is not activated.

•Mute/Unmute turn the onboard microphone either on or off.

–Tap Mute during a call to mute the microphone. A green line will appear under the Mute button.

–Tap Mute again to unmute the microphone. The green line will disappear when Mute is not activated.

•Headset connects to a Bluetooth headset.

–Tap Headset during a call to activate a Bluetooth headset. A green line will appear under the Headset button.

–Tap Headset again to de-activate the Bluetooth headset. The green line will disappear when the Headset is not activated.

•Press for more options:

–Contacts: allows you to go to your Contact list.

–Memo: allows you to jot down a memo during a call.

–Noise Suppression On/Off: allows you to turn on the Noise Suppression feature when you are in a noisy area. Turn it Off when not needed to conserve battery power.

–In-call sound EQ: assigns a sound equalizer preset for use during an active call. Sometimes you might need the sound to be softer, clearer, or optimized for one ear or the other.

Placing a Call on Hold

You can place the current call on hold at any point during a conversation. You can also make another call while you have a call in progress if your network supports this service.

1. While on a call, tap Hold Hold . This action places the current caller on hold.

2.You can later reactivate this call by tapping Unhold

Unhold .

To make a new call while you have a call in progress

1.Tap Hold Hold .

2.Tap Add call to display the dialer.

3.Enter the new number and tap .

Once connected, the active call will appear in a large box in the middle of your screen and the call on hold will appear in a small box in the upper right corner of your screen.

Call Functions 53