Samsung GT-I9300BLACK user manual Sending Contacts via Bluetooth, Disconnecting a paired device

Disconnecting a paired device

Disconnecting a paired device breaks the connection between the device and your phone, but retains the knowledge of the pairing. At a later point when you wish to reconnect the device, there is no need to setup the connection information again.

1.Verify your Bluetooth is active.

2.From the Bluetooth settings page, tap the previously paired device (from the bottom of the page).

3.Tap OK to confirm disconnection.

Note: Disconnections are manually done but often occur automatically if the paired device goes out of range of your phone or it is powered off.

Deleting a paired device (unpair)

Deleting a device from your list removes its “connection record” and upon reconnection would require that you re- enter all the previous pairing information.

1.Verify your Bluetooth is active.

2.From the Bluetooth settings page, tap next to the previously paired device. This opens the connected

device’s menu options.

3.Tap Unpair to delete the paired device.

4.Tap Rename to change the name of the paired device.

5.Tap Call audio to enable or disable call audio from the paired device.

Sending Contacts via Bluetooth

Depending on your paired devices’ settings and capabilities, you may be able to send pictures, Contact information, or other items using a Bluetooth connection.

Note: Prior to using this feature, Bluetooth must first be enabled, and the recipient’s device must be visible.

1.Verify your Bluetooth is active.

2.From the Home screen, tap ➔ Contacts .

3.Press ➔ Import/Export ➔ Send namecard via.

4.Tap each contact that you would like to send via Bluetooth. A green checkmark will appear next to each entry you select.

5.Tap Done.

6.Tap Bluetooth.

7.Select the paired device to send the contacts to.

Connections 155