Samsung GT-P6210 user manual Wi-Fi Direct Settings, Wireless and networks Wi-Fi Direct settings

Add Wi-Fi Network

To open a dialog where you can add a Wi-Fi network by entering its Network SSID (the name it broadcasts), security type, and other properties:

1.From a Home screen, touch Apps ➔ Settings

➔ Wireless and networks.

2.Touch Wi-Fi settings, then touch Add Wi-Fi network.

3.Use the keyboard to enter Network SSID.

4.Touch the Security field and then touch a security type.

5.Use the keyboard to enter the Password.

6.Touch Save.

Wi-Fi Direct Settings

You can configure your device to connect directly with other Wi-Fi capable devices. This is an easy way to transfer data between devices. These devices must be enabled for Wi-Fi Direct communication. This connection is direct and not via a hot spot or WAP.

Note: Activating this feature will disconnect your current Wi-Fi network connection.

1.From a Home screen, touch Apps ➔ Settings

➔ Wireless and networks Wi-Fi Direct settings.

2.Touch Device name and use the keyboard to change your device’s name.

3.Touch Wi-Fi Direct.

A check mark displayed next to the feature indicates it is enabled. Your device will begin to search for other devices enabled with Wi-Fi direct connections.

4.After scan, touch a device name to begin the connection process to another Wi-Fi Direct compatible device.

Note: The target device must also have Wi-Fi Direct service active and running before it can be detected by your device.

5.Touch Connect.

The direct connection is then established.

6.When prompted to complete the connection, touch OK. The status field now reads “Connected” and your connected device is listed within the Wi-Fi Direct devices listing.

For more information, refer to “Wi-Fi Direct” on page 107.

Settings 143