ŝ112ŞSetting the Recorded Pixels and Quality Level
4. Use the four-way controller (ƌ) to select (Manual).
5. Press the four-way controller (Ȟ).
- The message screen appears.
6. Fully display a white or grey sheet of paper in the viewfinder under the light to adjust white balance.
7. Press the shutter release button fully.
- Slide the focus mode lever to when the shutter cannot be released.
[OK] appears on the LCD monitor when setting is completed.
[NG] appears when setting is not completed successfully.
8. Press the button.
ƃNo image is recorded when the shutter release button is pressed to adjust the white balance.
ƃPress the button when adjustment is unsuccessful to set again.
ƃYou can set the range to measure white balance when setting manually.
White balance is measured using the entire screen using multi-segment metering (p.129) if [Entire
screen] is selected for [Man. WB Measurement] in [ Custom Setting] menu (p.99). White
Balance is only adjusted in the spot metering area (p.130) if [Spot metering area] is selected.
ƃIf picture is extremely overexposed or underexposed, white balance may not be adjusted. In this
case, set an appropriate exposure and re-adjust the white balance.
INFORMATION