ŝ49ŞUsing the Built-in Flash
3. Press the shutter release button fully. The picture is taken.
2. Press the shutter release button fully. The flash discharges and the picture is taken.
3. Push the flash down to retract.
4. Push down on the portion indicated in the illustration to retract
the flash.
1. Press the button.
The built-in flash pops up and begins charging.
Manual discharge mode (Flash ON) is used regardless of flash
mode settings. When the flash is fully charged, appears in
the LCD panel and viewfinder.
Using Manual Discharge (Flash ON) ,
ƃSwitch between Auto discharge mode and Manual discharge mode (Flash ON) by pressing the
button while the built-in flash is popped up.
If Auto discharge is set, appears on the LCD panel.
INFORMATION
ƃSwitch between Auto discharge mode and Manual discharge
mode by pressing the button while the built-in flash is
popped up when shooting mode is set to , , ,
, , , or .
INFORMATION