ŝ138Ş
Setting the Exposure
- The shutter speed and aperture value are displayed in the
viewfinder and on the LCD panel.
The value of the shutter speed or aperture being adjusted is
underlined in the viewfinder. While adjusting the shutter speed
or aperture value, the difference in the appropriate exposure
(EV value) appears at the bottom right of the viewfinder. The appropriate exposure is set when
[0.0] is displayed.
Difference from the
appropriate exposure
ƃWhen in (Manual) mode, the sensitivity is equivalent to ISO 200 when sensitivity is set to
[AUTO].
ƃBlinks when the difference with appropriate exposure is over ±3.0.
ƃSet the shutter speed and aperture values in increments of 1/2 EV or 1/3 EV.
Set in [Expsr Setting Steps] in the [ Custom Setting] menu. (p.141)
INFORMATION
Exposure Warning
You are out of the measuring area if the shutter speed and
aperture blink. Use an ND (Neutral Density) filter if the subject is
too bright. Use a flash if it is too dark.