I N S T A L L AT I O N

Antennas with 75-ohm Round Leads

Plug the antenna lead into the ANT-A or ANT-B terminal on the rear panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires a an optional combiner-adaptor (available at most electronics shops).

1

Connect both antenna leads to the combiner.

2

Plug the combiner into the ANT-A or ANT-B ter- minal on the rear panel.

Connecting Cable TV

You can connect different cable systems to your TV, including cable without a cable box, and cable with a cable box that descrambles some or all channels.

Cable without a Cable Box

If you want to connect cable, and you do not need to use a cable box:

Plug the incoming cable into the ANT-A or ANT-B antenna terminal on the rear of the TV.

CHAPTER TWO: INSTALLATION 2.2

Page 15
Image 15
Samsung HCM653WB, HCM4715W, HCM553WB Connecting Cable TV, Antennas with 75-ohm Round Leads, Separate VHF and UHF Antennas