Identifying parts and controls (Continued)

To remove the lens hood

Loosen the lens hood by turning it in the opposite direction of the arrow in the illustration above.

Remove the lens hood when you use the flash, Nightshot or SuperNightshot, or its shadow will appear in the picture.

Remote Commander

7

18 2

39 4

5

6q;

Insulation sheetAPHOTO button (24)
EVideo control buttons (Rewind, Playback, Fast-forward, Pause, Stop, Slow) (28)FZERO SET MEMORY button* (32)GTransmitterHSTART/STOP button (21, 23)IPower zoom buttons (25, 30)JDISPLAY button (18)

*These buttons are not available during Easy Handycam operation.

bNotes

Remove the insulation sheet before using the Remote Commander.

Aim the Remote Commander towards the remote sensor to operate your camcorder (p. 105).

To change the battery of the Remote Commander

1While pressing on the tab, inset your fingernail into the slit to pull out the battery case.

2Place a new battery with the + side facing up.3Insert the battery case back into the Remote Commander until it clicks.Tab WARNING

The on-screen image when you press this button will be recorded onto the “Memory Stick Duo” as a still image.

BMemory control buttons (Index*, –/+, Memory playback) (29)CSEARCH M. button* (33)D. > (Previous/Next) buttons* (33)

Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.

bNotes

When the lithium battery becomes weak, the operating distance of the Remote Commander may shorten, or the Remote Commander may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.

106