CAMERA SET menu (Continued)

100

The zebra pattern appears at a screen brightness level of about 100 IRE or higher.

bNotes

Portions of the screen where brightness is about 100 IRE or higher may appear overexposed.

zTips

• IRE represents the screen brightness.HISTOGRAM

When you set [HISTOGRAM] to [ON], the [HISTOGRAM] (a graph to display a distribution of tones in your picture) window appears on the screen.

This item is useful when you adjust exposure. You can adjust the [EXPOSURE] or [AE SHIFT] checking the [HISTOGRAM] window. The [HISTOGRAM] will not be recorded on a tape or “Memory Stick Duo.”

80

PixelsDarker BrighterBrightness

zTips

The left area on the graph shows the darker areas of the picture while the right area shows the brighter areas.

SELF-TIMERA still image is recorded after about 10 seconds.Press PHOTO when [SELF-TIMER] is set to [ON] and appears.To cancel the count down, touch [RESET].To cancel the self-timer, select [OFF].

zTips

You can also operate by pressing PHOTO on the Remote Commander (p. 106).DIGITAL ZOOM

You can select the maximum zoom level in case you want to zoom to a level greater than 10 × (the default setting) while recording on a tape. Note that the image quality decreases when you are using the digital zoom.

The right side of the bar shows the digital zooming factor. The zooming zone appears when you select the zooming level.

BOFF

Up to 10 × zoom is performed optically.20 ×

Up to 10 × zoom is performed optically, and after that, up to 20 × zoom is performed digitally.

STEADYSHOT

You can compensate for camera shake (The default setting is [ON]). Set [STEADYSHOT] to [OFF] () when using a tripod (optional), then the image becomes natural.

48