Samsung HDR-HC9 STOP, SEARCH M, Press STOP, 3 Press mREW, 4 Press PLAY, Recording/Playback, To cancel the operation, To cancel the operation, and appears on the screen

1 During playback, press ZERO SET MEMORY on the Remote Commander at a point you want to locate later on.

The tape counter is reset to “0:00:00”and appears on the screen.

60min 0:00:00

GUIDE

P-MENU

If the tape counter is not displayed, press DISPLAY.2 Press STOP when you want to stop playback.3 Press mREW.The tape stops automatically when the tape counter reaches “0:00:00.”

The tape counter returns to the time code display, and the zero set memory display disappears.

4 Press PLAY.Playback starts from the point designated “0:00:00” on the tape counter.

•Zero set memory will not function correctly if there is a blank section between recorded sections on the tape.

Searching for a scene by date of recording (Date search)You can locate the point where the recording date changes.Slide the POWER switch repeatedly to turn on the PLAY/EDIT lamp (p. 28).SEARCH M.

./>

STOP

1 Press SEARCH M. on the Remote Commander.2 Press .(Previous)/>(Next) to select a recording date.

60min	0:00:00:00
	60min

DATE -01

SEARCH

GUIDE

P-MENU

Recording/Playback

To cancel the operationPress ZERO SET MEMORY again before rewinding.

bNotes

•There may be a discrepancy of several seconds between the time code and the tape counter.

To cancel the operation

Press STOP.

bNotes

•The Date search will not function correctly when there is a blank section between recorded sections on the tape.

33