qd EASY button

Press EASY to display and most of the settings are set automatically for easy recording/playback. To cancel, press EASY again.

qf DISP/BATT INFO button

You can switch the screen display when you press while the power is set to on. When you press while the POWER switch is set to OFF (CHG), you can check the remaining battery.

qg . (back light) button

Press . (back light) to display . for adjusting the exposure for backlit subject. Press . (back light) again to cancel the backlight function.

qj Built-in microphone Sound picked up by the internal microphone is converted to 5.1ch surround sound and recorded.

qk Flash

The flash will flash automatically depending on recording conditions in the default setting.

Touch (HOME) t (SETTINGS)

t[PHOTO SETTINGS] t [FLASH MODE] to change the setting.

ql Remote sensor/Infrared port Receives the signal from the Remote Commander.w; Camera recording lamp

The camera recording lamp lights up in red during recording. The lamp flashes when the remaining media capacity or battery power is low.

wa Tripod receptacle (Bottom surface) Attach a tripod (optional) to the tripod receptacle using a tripod screw (optional: the length of the screw must be less than 5.5 mm (7/32 in.)).

Connecting to other devices5HDMI OUT (mini) jack

Connect with the HDMI cable (optional).

6A/V Remote Connector/A/V OUT jack

Connect with the component A/V cable or A/V connecting cable.

7 (USB) jack

Connect with the USB cable.

qs (DISC BURN) button

Create a disc by connecting the camcorder to a computer, etc. For details, see “PMB Guide” (p. 26).

qh Active Interface Shoe

 

 

 

 

 

The Active Interface Shoe supplies power

 

to optional accessories such as a video light,

 

a flash, or a microphone. The accessory can

 

Recording/Playback

be turned on or off as you operate the

 

POWER switch on your camcorder.

 

ws Interface connector

 

Connect your camcorder and the Handycam

 

Station.

 

US

17