1Connect the AC Adaptor to the Handycam Station and a wall outlet (wall socket).

2Set your camcorder onto the Handycam Station, then turn on your camcorder.

3Connect the (USB) jack of the Handycam Station (p. 17) to the computer using the supplied USB cable.

The [USB SELECT] screen appears on your camcorder automatically.

4Touch [ USB CONNECT] or [ USB CONNECT] on the [USB SELECT] screen of your camcorder.

7Click [Continue].

8Read [License Agreement], select [I accept the terms of the license agreement] if you agree, then click [Next].

9Confirm the installation settings, then click [Install].

b Notes

•Even if a screen prompting you to restart your computer appears, you do not need to restart it at this time. Restart your computer after completing the installation.

•It may take some time for the authentication.

0Follow the on-screen instructions to install the software.

Depending on the computer, you may need to install third party software. If the installation screen appears, follow the instructions to install the required software.

qa Restart the computer if required to complete the installation.qs Remove the CD-ROM from the disc drive of your computer.

US

To disconnect the USB cable

1Click the icon t [Safely remove USB Mass Storage Device] t [OK] (Windows 2000 only) on the task tray on the bottom right of the desktop of the computer.

2Touch [END] t [YES] on the screen of your camcorder.3Disconnect the USB cable.

Operating the “Picture Motion Browser”

To start “Picture Motion Browser,” click [Start] t [All Programs] t [Sony Picture Utility] t [PMB – Picture Motion Browser].

For the basic operation of “Picture Motion Browser,” see “PMB Guide.” To display “PMB Guide,” click [Start] t [All Programs] t [Sony Picture Utility] t [Help] t [PMB Guide].

zTips

•If the [USB SELECT] screen does not appear,

touch (HOME) t (OTHERS) t [USB CONNECT].

26