–Leaving the casing in contact with rubber or vinyl objects for a long period of time
About care and storage of the lens
•Wipe the surface of the lens clean with a soft cloth in the following instances:
–When there are fingerprints on the lens surface.
–In hot or humid locations
–When the lens is exposed to salty air such as at the seaside.
•Store in a
•To prevent mold, periodically clean the lens as described above. It is recommended that you operate your camcorder about once a month to keep it in optimum state for a long time.
On charging theYour camcorder has a
However, even if the
Connect your camcorder to a wall outlet (wall socket) using the supplied AC Adaptor, and leave it with the POWER switch set to OFF (CHG) for more than 24 hours.
Power supply
You can use your camcorder in any countries/ regions using the AC Adaptor supplied with your camcorder within the AC 100 V to 240 V, 50/60 Hz range.
Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet [b].
[a] | [b] |
To change the battery of the Remote Commander
1While pressing on the tab, inset your fingernail into the slit to pull out the battery case.
2Place a new battery with the + side facing up.3Insert the battery case back into the Remote Commander until it clicks.Tab
WARNING
Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
•When the lithium battery becomes weak, the operating distance of the Remote Commander may shorten, or the Remote Commander may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.
US
31