You cannot install “Picture Motion Browser.”•Check the computer environment required to install “Picture Motion Browser.”•Install “Picture Motion Browser” in the proper order (p. 25).“Picture Motion Browser” does not work correctly.•Quit “Picture Motion Browser” and restart your computer.Your camcorder is not recognized by the computer.

•Disconnect devices from the USB jack of the computer other than the keyboard, mouse, and your camcorder.

•Disconnect the USB cable from the computer and the Handycam Station, and restart the computer, then connect the computer and your camcorder again in the proper order.

US

Self-diagnosis display/Warning indicatorsIf indicators appear on the LCD screen, check the following.

If the problem persists even after you have tried to fix a couple of times, contact your Sony dealer or local authorized Sony service facility.

Indicators Causes/Solutions

C:04:ss • The battery pack is not an “InfoLITHIUM” battery pack (H series). Use an “InfoLITHIUM” battery pack (H series) (p. 8).

•Connect the DC plug of the AC Adaptor to the DC IN jack of the Handycam Station or your camcorder securely

(p. 8).

C:13:ss / • Remove the power source.

C:32:ss Reconnect it and operate your camcorder again.

E:20:ss / • A malfunction that you cannot

E:31:ss / service has occurred. Contact

E:61:ss / your Sony dealer or local

E:62:ss / authorized Sony service

E:91:ss / facility. Inform them of the 5-

E:94:ss digit code, which starts from “E.”

101-0001 • When the indicator flashes slowly, the file is damaged or unreadable.

• An error may have occurred

with the hard disk drive in your camcorder.

• The hard disk of the camcorder is full. Delete unnecessary images on the hard disk.

•An error may have occurred with the hard disk drive in your camcorder.

E• Battery power is low.

• The temperature of your camcorder is getting high. Turn off your camcorder and leave it in a cool place.

28