Samsung HL-R5687W, HL-R5087W instruction manual Rear Panel Jacks, Antenna terminals

Rear Panel Jacks

Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and two set of component video input jacks on the rear panel of your TV. For more information, please see “Connections”.

ΠANTENNA terminals

Two independent cables or antennas can be connected to these terminals. Use “Cable IN” and “Air IN” terminals to receive a signal from VHF/UHF antennas or your cable system. Use the “Cable OUT” terminal to send the signal being received by the “Cable IN” terminal out to another component (such as a Cable Set-Top Box). (Refer to page 20)

´Component1, 2 jacks (Y, PB, PR, L, R)

Use these jacks to connect the component video/audio signals from a DVD player or a set-top box. (Refer to page 26~27)

ˇ VIDEO/AUDIO OUTPUT jacks

Sends video/audio signal from the TV to an external source, such as a VCR.

These jacks are available only in RF, Video and S-Video modes.

¨ S-VIDEO INPUT jacks

Connects an S-Video signal from an S-VHS VCR or DVD player. (Refer to page 25)

ˆ VIDEO/AUDIO INPUT jacks

Connect video/audio signals from external sources, such as VCR or DVD players. (Refer to page 26)

ØDVI (Digital Visual Interface) AUDIO INPUT jacks

Connect to the digital audio output jacks of a device with DVI output. (Refer to page 27)

∏ DIGITAL AUDIO OUT(OPTICAL) jack Connect to a Digital Audio Component. (Refer to page 29)

” Anynet

Please refer to the Anynet Owner’s Instruction.

’HDMI (High Definition Multimedia Interface)/ DVI

INPUT jack

Connect to the HDMI jack of a device with HDMI output.

Connect to the digital video output jack for device with DVI output. (Refer to page 27~28)

˝CableCARDTM

Insert the CableCARD into the slot. (Refer to page 24)

Ô SERVICE

This jack is for software upgrades.

English - 15