Connecting VHF and UHF Antennas

If you do not have a cable system, you will need to connect an antenna to your TV.

Antennas with 300-ohm Flat Twin Leads

If your antenna looks like this: it has 300-ohm flat twin leads.

Place the wires from the twin

1 leads under the screws on the

300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws.

Plug the adapter into the “Air

2 IN” terminal on the rear panel.

If your antenna looks like this: it is an antenna with 75-ohm round leads.

Plug the antenna lead into the

1 “Air IN” terminal on the rear panel.