CONNECTING POWER TO THE PROJECTOR
The power cord receptacle and AC POWER switch are located below the projector’s connector panel.
MONITOR OUT
2
RGB IN
CONTROL
Figure
1Plug the appropriate power cord for your location into the power receptacle on the side of the projector.
2Connect the power cord to a
CONNECTING COMPUTER VIDEO
Connecting a PC
Use the included VGA video cable to connect your PC to the projector. If you want to use your monitor and DP5500 at the same time, use your existing monitor cable to connect the projector to a separate monitor.
VGA
VGA
VGA Connector Cable
Figure