CYCLOPS | VIDEO | L | AUDIO | R | |
| 1 |
|
|
|
|
| 2 |
|
|
|
|
AUDIO |
|
|
| AUDIO |
|
IN |
|
|
| OUT |
|
1 |
|
|
|
|
|
|
|
| MONITOR OUT |
| |
2 |
|
|
|
|
|
| RGB IN |
|
| CONTROL |
|
VGA Cable
To Computer In
From
Monitor Out
Figure 2-9 VGA connections
1Unplug the monitor cable from the computer.
2Plug one end of the supplied VGA cable into the RGB IN 1 port on the projector. Plug the other end of the VGA cable into the computer's Video Out (VGA) port.
3Connect your audio source to the AUDIO IN 1 port on the projector (see page
NOTE: If you are using a second computer video or audio source, plug their outputs into the RGB IN 2 and AUDIO IN 2 connectors.
4If you want to use an external monitor, connect the monitor cable to the RGB OUT port of the projector.
5Turn the projector on and press the STANDBY/ON key.
NOTE: An external monitor is not required to use the DP5500.
Setting Up the Desktop Projector 5500