Proxima ASA DP5500 manual Connecting Composite Video, Connecting An S-Video Source

CONNECTING COMPOSITE VIDEO

You can display composite video (NTSC, PAL or SECAM) on the DP5500.

CYCLOPS S-VIDEO VIDEO

L AUDIO R

1

2

Figure 2-14Video 1 & 2 ports

Use the supplied AV cable (see page 1-2) to connect an NTSC, PAL, or SECAM source to your projector.

1Find the RCA connector on your video source marked Video Out

(or something similar). This connector is usually yellow. Insert one of the AV cable’s yellow connectors into the Video Out jack on the video source.

2Insert the other yellow connector into the projector’s VIDEO 1 port.

CONNECTING AN S-VIDEO SOURCE

To connect an S-Video source, use the supplied S-Video cable (see page 1-2) instead of an RCA cable connection. The S-Video cable has identical, round, 4-pin mini-DIN connectors on both ends.

CYCLOPS S-VIDEO VIDEO

L AUDIO R

1

2

Figure 2-15The S-VHS port

To connect an S-Video source:

1Insert one end of the S-Video cable into the mini-DIN Video Out port on the video source.

2Insert the other end of the S-Video cable into the projector’s S-VIDEO port.

Setting Up the Desktop Projector 5500 2-11