Proxima ASA DP5500 manual Connecting Non-Computer Audio

3Use the red and white AV Cable connectors to connect audio from the S-Video source to the projector. See connecting Non-Computer Audio, below.

CONNECTING NON-COMPUTER AUDIO

The AUDIO ports allow you to connect stereo or monaural audio from a composite video source.

L AUDIO R

Figure 2-16Audio Input ports

For stereo audio, use the supplied AV cable.

1Insert the red (right) and white (left) ends of the cable into the Audio Out ports of a composite video’s audio source.

2Connect the other end of each cable to the projector’s AUDIO IN ports.

NOTE: Although two COMPUTER AUDIO sources and two other AUDIO sources may be connected simultaneously, only one can be active. If computer video is selected, COMPUTER AUDIO is active. If NTSC, PAL, SECAM, or S-VHS video are being viewed, AUDIO is active.

If your audio source is monaural, connect it to the left AUDIO port.

2-12Chapter Two