Projector
PROBLEM | LIKELY CAUSE | POSSIBLE SOLUTION(S) |
|
|
|
No image projected | No power to projector. | Turn power ON. |
|
| Check AC cord. |
|
| Check power to electrical outlet. |
|
|
|
| Lamp not on. | Turn lamp ON. |
| Lamp burned out. | Replace lamp assembly. |
|
|
|
| Over temperature indication. | Allow projector to cool; turn |
|
| projector OFF and then ON. |
|
| Make sure the bottom air filter |
|
| door is closed. |
|
|
|
No computer image | Loose cable. | Check and secure cable |
projected |
| connections. |
|
|
|
| No power to computer. | Turn on computer. |
|
|
|
| Incompatible video system. | If possible check computer with |
|
| another monitor. |
|
|
|
No video image | Video source(s). | Check power on the video |
projected |
| source(s). |
|
|
|
| Loose cable. | Check and secure cable |
|
| connections between video |
|
| source and projector. |
|
|
|
LAMP indicator | Replace lamp assembly. | |
glowing red |
|
|
|
|
|
Displayed image | Projector set at an | Adjust relative positions of |
not square | improper angle to | projector and screen. |
(keystoning) | projection screen. |
|
|
|
|
Projected image | Projection lens not focused. | Adjust the lens focus. |
out of focus |
|
|
|
|
|
Projected image Zoom lens not adjusted
larger than screen properly, or projector too far from screen.
Adjust zoom lens, or move projector closer to screen.