Proxima ASA DP5500 manual Connecting Macintosh Computers

Connecting Macintosh Computers

Use the video adapter cable shown below to connect a Macintosh computer to the DP5500.

From

Mac CPU

Mac – VGA Cable Adapter

Figure 2-10The Macintosh adapters

To VGA

Cable

Use the cable adapter and supplied VGA video cable to connect the projector to your Macintosh computer.

Mac - VGA

Cable Adapter

VGA Cable

to

Computer 1

In Port

CYCLOPS	S-VIDEO	VIDEO	L	AUDIO	R
	1
	2
AUDIO				AUDIO
IN				OUT
1
			MONITOR OUT
2
	RGB IN			CONTROL

Macintosh		VGA - Mac
Monitor Cable
	To Monitor Out Port	Monitor Cable

Figure 2-11Macintosh connections

1Unplug the Macintosh monitor cable from the computer.

2Plug one end of the supplied VGA video cable into the RGB IN 1 port on the projector. Attach the VGA end of the Mac - VGA cable adapter to the other end of the VGA video cable.

3Plug the Mac end of the Mac - VGA cable adapter into the Macintosh video port.

4Connect the audio source to the projector's AUDIO IN 1 port (see page 2-10).

NOTE: If you are using a second computer video or audio source, plug their

outputs into the RGB IN 2 and AUDIO IN 2 connectors.

2-8Chapter Two