English - 54
Channel Control
Labeling the Channels
Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,
“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear below the channel number.
1Press the CH or CH button to tune to the channel that
will be labeled.
2Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button.
Press the …or †button to
select “Name”, then press
the ENTER button.
3Press the …or †button to
move to the channel to be
assigned to a new name,
then press the ENTER button.
Press the …or †button to
select a letter, a number or a
blank. (Results in this
sequence: A...Z, 0...9, +,
-
,
✽, /, blank).
4Press the √button to switch
to the next field, which will
be selected.
Select a second letter or digit
pressing …or †button, as
above.
Repeat the process to select
the last three digits.
Press the ENTER button.
After all settings are completed, select “OK” using the √button.
Press the ENTER button to save the settings and return to the
previous menu.
To erase the assigned new name, select “Clear” by pressing
the œor √button, then press the ENTER button.
Press the EXIT button to exit.
NOTE
•If you add or delete a TV channel, the channel label (if set) will
also be added or deleted.
Channel
Antenna : Air
√
Auto Program
√
Channel Manager
√
Name
√
Fine Tune
√
Signal Strength
√
LNA : On
√
Move Enter Return
Name
Move Adjust Return
Air
2A
Air
3
-----
Air
4
-----
Air
5
-----
Air
6
-----
▲
▼
▼
OK
Clear
Clear
Clear
Clear
Clear
Name
Move Adjust Return
Air
2 CNN02
Air
3
-----
Air
4
-----
Air
5
-----
Air
6
-----
▼
OK
Clear
Clear
Clear
Clear
Clear
▲
▼
BP68-00586D-01Eng(048~059) 3/16/06 4:21 PM Page 54