Samsung HL-T5055W Viewing the Menus, Memorizing the Channels, Selecting the Video Signal-source

Viewing the Menus

1With the power on, press the MENU button.

The main menu appears on the screen. Its left side has five icons: Picture, Sound, Channel, Setup, Input.

2Use the ▲ or ▼ button to select one of the five icons.

Then press the ENTER button to access the icon’s sub-menu.

3Press the EXIT button to exit.

➢It takes about one minute until the on-screen menu disappears.

	Input
Source List	: TV	►
Edit Name		►

Move Enter Exit

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (air) and cable channels. After the available channels are memorized, use the CH and CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV(i.e. an air or a cable system).

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

2Press the ENTER button select Antenna.

Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button. Press the MENU button.

Channel
Antenna	: Air	►
Auto Program		►
Clear Scrambled Channel		►
Channel List		►
Name		►
Fine Tune		►
Signal Strength		►
LNA	: On	►
Move	Enter	Return
Channel
Antenna	: Air
Auto Program	Cable
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA	: On
Move	Enter	Return

Storing Channels in Memory (Automatic Method)

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

2Press the ▲ or ▼ button to select Auto Program, then press the ENTER button.

3Press the ▲ or ▼ button to select the antenna connection, then press the ENTER button.

➢Air : “Air” antenna signal.

Cable : “Cable” antenna signal.

Air+Cable : “Air” and “Cable” antenna signals.

➢If the antenna is connected to ANT 1 IN(CABLE), select Cable and if it is connected to ANT 2 IN(AIR), select Air.

➢If both ANT 1 IN and ANT 2 IN are connected, select the Air + Cable.

➢If you selected Air, then go to step 5.

Channel
Antenna	: Air	►
Auto Program		►
Clear Scrambled Channel		►
Channel List		►
Name		►
Fine Tune		►
Signal Strength		►
LNA	: On	►
Move	Enter	Return
Auto Program
Selects the antennas to memorize.
Air	Start
Cable	Start
Air + Cable	Start
Move	Enter	Return

Continued...

English - 19