Samsung HL-T5655W, HL-T5055W LNA Low Noise Amplifier, Using Your TV as a Computer PC Display

LNA (Low Noise Amplifier)

Use fine tuning to manually adjust a particular channel for optimal reception.

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

2Press the ▲ or ▼ button to select LNA, then press the ENTER button.

3Press the ▲ or ▼ button to select Off or On, then press the ENTER button. Press the EXIT button to exit.

➢LNA functions only when antenna is set to Air.

The LNA setting must be made separately for each channel.

➢If the picture is noisy with the LNA set to On, select Off.

Channel
Antenna	: Air	►
Auto Program		►
Clear Scrambled Channel		►
Channel List		►
Name		►
Fine Tune		►
Signal Strength		►
LNA	: On	►
Move	Enter	Return
Channel
Antenna	: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength	Off
LNA	: On
Move	Enter	Return

PC Display

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer or video card manufacturer.)

1First, click on Control Panel on the Windows start menu.

2When the control panel window appears, click on Appearance and Themes and a display dialog- box will appear.

3When the control panel window appears, click on Display and a display dialog-box will appear.

4Navigate to the Settings tab on the display dialog-box. The correct size setting (resolution)

Optimum: 1024 x 768 pixels

If a vertical-frequency option exists on your display settings dialog box, the correct value is 60 or 60 Hz. Otherwise, just click OK and exit the dialog box.

Display Modes

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system does not equal the standard signal mode, adjust the mode by referring to your video card user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacture.

D-Sub Input

Video Signal	Resolution	Horizontal	Vertical	Pixel Clock	Sync Polarity
	(Dot X Line)	frequency (kHz)	frequency (Hz)	(MHz)	(H/V)
	720 x 400	31.47	70.00	28.322	-/-
		31.47	60.00	25.175	-/+
VGA		35.00	66.70	30.24	-/-
	640 x 480	37.86	72.80	31.50	-/-
		37.50	75.00	31.50	-/-
		43.27	85.00	36.00	-/-
		35.16	56.30	36.00	-+/-
SVGA	800 x 600	37.88	60.30	40.00	+/+-
		48.08	72.20	50.00	+/+
		46.87	75.00	49.50	+/+
		53.67	85.10	56.25	+/+
		48.36	60.00	65.00	-/-
XGA	1024 x 768	56.40	70.10	75.00	-/-
		57.80	72.00	74.99	-/-
		60.02	75.00	78.75	+/-

Continued...

English - 42