Furuno 1833C-BB, 1953C-BB manual XTE Cross-Track Error alarm, Speed alarm, How the XTE alarm works

3. PLOTTER OPERATION

3.11.4XTE (Cross-Track Error) alarm

The XTE alarm warns you when your boat is off its intended course. When the XTE alarm is active two red dashed lines mark the XTE alarm area.

Own ship	Alarm	Destination
position		waypoint
	setting

Intended course

: Alarm

How the XTE alarm works

1.Press the [ALARM] key to open the alarm menu.

2.Use the trackball to select XTE ALARM.

3.Press the A:EDIT soft key to open the XTE alarm window.

XTE ALARM

▲°

§ON 0.050nm

OFF

▼

XTE alarm window

4.Use the trackball and the alphanumeric keys to enter alarm setting: Operate the trackball to select digit; use the alphanumeric keys to enter value. The available XTE alarm setting is 0.001 to 9.999 miles.

5.Press the C:ENTER soft key or push the [ENTER] knob to register setting.

6.Press the [ALARM] key to finish.

3.11.5Speed alarm

The speed alarm warns when your boat’s speed is within or under/over the speed range set.

1.Press the [ALARM] key to open the alarm menu.

2.Use the trackball to select SPEED ALARM.

3.Press the A:EDIT soft key to display the speed alarm window.

SPEED ALARM

▲

WITHIN

°000.0 - 000.0 kt

UNDER/OVER

§000.0 - 000.0 kt

OFF

▼

Speed alarm window

offered by Busse-Yachtshop.de 3-55