Furuno FURUNO MARINE RADAR, 1953C-BB Editing a waypoint from the plotter display, Plotter display

Models: FURUNO MARINE RADAR 1823C-BB 1953C-BB 1933C-BB 1833C-BB 1943C-BB

1 252
Download 252 pages 38.1 Kb
Page 114
Image 114

3. PLOTTER OPERATION

Editing a waypoint from the plotter display

You may edit waypoints from the plotter display as follows:

1.Press the [MENU] key followed by the C:WAYPOINTS/ROUTES and A:WAYPOINTS soft key to open the waypoint menu.

2.Press the C:WAYPOINT BY CURSOR soft key.

3.Operate the trackball to place the cursor on the waypoint which you want to change. A flashing diamond mark appears on the waypoint when it is correctly selected.

4.Press the D:EDIT/MOVE soft key. Three soft keys replace the D:EDIT/MOVE soft key:

B:EDIT WPT: Edit from the waypoint entry window.

C:MOVE WPT: Move waypoint to new position with the cursor.

D:ERASE WPT: Erase waypoint. See paragraph 3.8.3.

5.Press the appropriate soft key. For the “EDIT WPT,” the waypoint entry window appears; edit data as appropriate. For “MOVE WPT,” do the following:

a)Operate the trackball to place the cursor on the location desired for the waypoint. A line connects previous position and new position.

b)Push the [ENTER] knob. The waypoint moves to the cursor position and its position is changed on the waypoint list. If the waypoint is set as destination or is part of a route, you are asked if you are sure to move the waypoint. In this case, push the [ENTER] knob to move the waypoint, or press the [CLEAR] key to cancel.

c)Press the [MENU] key to finish.

Range and bearing from own ship to cursor

+

34° 22. 345’N

86.6° M

 

TRIP NU

080° 22. 345’E

4.53nm

99.9 nm

 

16.0nm

 

 

 

(1) Select waypoint to move,

 

 

C

RNG

FISH

 

 

BRG

then press D:EDIT/MOVE

 

 

 

 

 

 

 

and C:MOVE WPT soft keys. WP-002

 

 

 

(2) Drag cursor to new position,

BRIDGE

E CANCEL

then push the [ENTER] knob.

 

 

Press to alternately display range/bearing from own ship to cursor, range/bearing from original waypoint position to cursor position.

Below is an example of the range/bearing from original waypoint position to cursor position.

+

34° 22.

3456’N

FROM

5.3° M

 

080° 22.

3456’E

FISH

1.45 nm

 

 

 

 

 

Plotter display

3-32

offered by Busse-Yachtshop.de

Page 114
Image 114
Furuno FURUNO MARINE RADAR, 1953C-BB, 1943C-BB, 1933C-BB manual Editing a waypoint from the plotter display, Plotter display