3. PLOTTER OPERATION

4. Press the B:NEW ROUTE soft key to open the new route entry screen.

ROUTE NAME

0 0 1

COMMENT

NEW

ROUTE

A PLOT

BLOCAL LIST

CALPHA LIST

D CONECT

E CANCEL

New route entry screen

5.If desired you can change the route name shown and/or add a comment. A route name may consist of six characters; comment, 13 characters.

6.Press the B:LOCAL LIST or C:ALPHA LIST soft key to open the waypoint list.

7.Use the trackball to select a waypoint, then press the A:ADD WPT soft key to add it to the route.

8.Repeat step 7 to complete the route.

Note: To clear last-entered waypoint, press the C:ERASE LST WP soft key. Each press of this key deletes the last waypoint entered.

9.Press the D:SAVE soft key to register the route.

10.Press the [MENU] key to close the menu.

Entering a route with the cursor

This method allows you to construct a route directly from the plotter display, using existing waypoints or new positions. Any new position will be saved as a waypoint, under the youngest empty waypoint number.

1.Follow steps 1-5 in “Entering a route with existing waypoints” on the previous page.

2.Press the A:PLOT soft key to show the plotter display.

3.Operate the trackball to place the cursor on an existing waypoint (C:ADD WP soft key appears) or new location (C:ADD NEW WP soft key appears).

4.Press the C:ADD WP soft key (or C:ADD NEW WP soft key).

5.Repeat steps 3 and 4 to complete the route.

6.Push the [ENTER] knob to register the route.

offered by Busse-Yachtshop.de

3-37

Page 119
Image 119
Furuno 1833C-BB, FURUNO MARINE RADAR, 1953C-BB, 1943C-BB, 1933C-BB New route entry screen, Entering a route with the cursor