Radar range setup menu, Model Maximum Range | Furuno 1943C-BB

5. CUSTOMIZING YOUR UNIT

5.2.2Radar range setup

You may choose the radar ranges you wish to use, from the RADAR RANGE SETUP menu. After choosing the ranges desired, change the range with the [RANGE] key to activate range settings. Available ranges depends on the radar used.

At least two ranges must be turned on. When less than two ranges are turned on you cannot escape from the RADAR RANGE SETUP menu.

Note that this function is not available with the GD-1900C-BB.

1.Press the [MENU] key to show the main menu.

2.Press the B:RADAR RANGE SETUP soft key to show the RADAR RANGE SETUP menu.

▲ 0.125nm	ON
0.25nm	ON
0.5nm	ON
0.75nm	ON
1nm	OFF
1.5nm	ON
2nm	OFF
3nm	ON
4nm	OFF
6nm	ON
8nm	OFF
12nm	ON
16nm	OFF
24nm	ON
36nm	OFF
48nm	OFF
64nm	OFF
72nm	OFF

MAXIMUM RANGE XXnm*

RANGE

SETUP

A ON/OFF

E RETURN

▲ 0.25km	ON
0.5km	ON
0.75km	ON
1km	ON
1.5km	OFF
2km	ON
3km	OFF
4km	ON
6km	OFF
8km	ON
12km	OFF
16km	ON
24km	OFF
36km	OFF
48km	OFF
64km	OFF
72km	OFF

MAXIMUM RANGE XXkm *

RANGE

SETUP

A ON/OFF

E RETURN

* = Max. range depends on network radar used and is set on the network radar at installation.

Range unit: nm

Range unit: km

Radar range setup menu

3.Use the trackball to select the range which you want to turn on or off.

4.Press the A:ON/OFF soft key to turn a range on or off as appropriate.

5.Press the E:RETURN soft key to register settings.

6.Press the [MENU] key to close the menu.

Model	Maximum Range
1823C-BB	24 nm, km, sm
1833C-BB	36 nm, km, sm
1933C-BB	48 nm, km, sm
1943C-BB	64 nm, km, sm
1953C-BB	72 nm, km, sm

5-6	offered by Busse-Yachtshop.de

Image 176

Furuno 1943C-BB, FURUNO MARINE RADAR, 1953C-BB, 1933C-BB, 1823C-BB, 1833C-BB Radar range setup menu, Model Maximum Range

Contents

Offered by Busse-Yachtshop.de 00014749700 Safety Instructions Table of Contents Iii Plotter Operation Video Sounder Operation Customizing Your Unit MAINTENANCE, Troubleshooting Vii Foreword Viii Features Model Output Range Radar System Configurations Single-unit NavNet system GD-1900C-BB Single-unit NavNet system GD-1900C-BB Xii Two-unit NavNet systemTwo-unit NavNet system Three-or-more-unit NavNet Operational Overview Control unit Operating ControlsOverview of control unit Soft keys Radar and plotter displays Processor unit Inserting a Chart CardChart card and card remover Turning the Unit On/Off Startup sequence Night Day Twilight Adjusting Hue, Panel IlluminationHue window Selecting a Display Display modesPanel brilliance windows Display screens Radar combination screen selection window Selecting a displayDisplay screen selection window Switching control in combination and overlay screens To adjust plotter Radar source and sounder source windows Selecting image sourceSelect source menu Trackball, Cursor Cursor, cursor data MOB mark messages Entering the MOB Mark, Setting MOB as DestinationMOB concept Data boxes Data BoxesShowing, hiding data boxes with soft key Rearranging data boxes Temporarily erasing a data box Executing a function Function Default Setting, Key LabelFunction Keys Simulation setup menu Simulation Display Plotter RadarNavNet processor unit-generated echoes Sounder Radar Display Radar display Tuning Adjusting the GainTuning window Transmitting, Stand-by Gain adjustment soft key Gain sensitivity window Adjusting the A/C SEA SEA setting windowReducing Sea Clutter How the A/C SEA works Reducing Precipitation Clutter Adjusting the A/C RainRain setting window Range scales km Range ScaleRange scales nm, sm Signal process soft keys Pulselength Radar display soft keys Presentation ModeSelecting a presentation mode Head-up presentation mode Course-up presentation modeDescription of presentation modes Head-up North-up presentation mode True motion presentation modeNorth-up True motion Measuring the Range Measuring range by range rings How to measure range to a target with the cursor Measuring range by cursorMeasuring range by VRM EBL/VRM soft keys How to measure range with the VRM Erasing a VRM, VRM indicationErasing VRM data boxes Hiding VRM data boxes How to measure bearing with the EBL Measuring the BearingMeasuring bearing by cursor Measuring bearing by EBL Moving EBL data boxes Erasing EBL data boxesHiding EBL data boxes Erasing the Heading Line, North Marker Reducing Noise Interference Rejecting Radar Interference Radar interference Zoom Zooming in on radar targetsZooming in on ARP, TTM targets Zoom Shifting the Picture Manual shiftTarget no. selection window Shifting the picture manually Setting automatic shift maximum speed Auto ship speed setting windowAutomatic shift Automatic shift Predicting collision course with the offset EBL Using the Offset EBLPredicting collision course Measuring range & bearing between two targets Measuring range and bearing between two targets Echo Trails Trail timeSample echo trails Trail soft keys Multitone and monotone trails Starting echo trailsTrail gradation Echo trail mode Trail mode windowTrail color Trail color window Echo Stretch Types of echo stretch Echo Averaging Effect of echo averaging Outputting TLL Data Target soft keys How to set a guard alarm zone Guard AlarmSetting a guard alarm zone When the alarm is violated… Canceling the guard alarm Setting watchman stand-by interval WatchmanHow watchman works Turning on/off watchman Suppressing Second-trace Echoes Second-trace echoes Waypoint Marker Waypoint marker Usage precautions for ARP 26 ARP, TTM Operation ARP target info window ARP setup menuActivating/deactivating ARP, TTM ARP plot symbols Acquiring and tracking targets ARPManual acquisition Automatic acquisition ARP target number Displaying target number ARP, TTMAutomatic acquisition area Cancel all targets window Terminating tracking of ARP targetsTerminating tracking of selected targets Terminating tracking of all targets Vector reference, vector time Setting vector attributes ARPWhat is a vector? History interval window Displaying past position ARPPast position displays 26.7 ARP, TTM target data ARP target data 26.8 CPA/TCPA alarm ARP CPA window Lost target alarm ARP Canceling a lost targetTcpa window Lost target mark Minimum and maximum ranges Interpreting the Radar DisplayGeneral Radar resolution Bearing resolutionRange resolution Bearing accuracy False echoes Multiple echoesMultiple echoes Sidelobe echoes Virtual image Virtual imageShadow sectors Shadow sectors Appearance of Sart signal on the radar display Sart Search and Rescue Transponder General procedure for detecting Sart response General remarks on receiving Sart Appearance of racon signal on the radar display Racon Radar BeaconSEA control Rain control Full-screen plotter display Plotter DisplaysFull-screen plotter display Contents of nav data window Nav data window Compass display Compass display XTE range setting window Reading the XTE cross-track error monitorSetting the range for the XTE monitor Highway display Highway display Nav data display Nav data displays Plotter display, north-up mode North-up Plotter display, auto course-up mode Course-upAuto course-up Plotter display, course-up mode, destination set Shifting the Display Chart ScaleCharts scales Chart icons and their meanings Chart CardsChart card overview When a chart cannot be displayed Indices and chart enlargementSample chart Japan, showing indices Data for aids to navigation Furuno and NavCharts chartsChart symbols Port service icons Plotter display, showing port service displayCurrent or tide data Current data display MAP charts Cursor and data displayObjects window Example of caution area window Object windows Icon dataLighthouse icon Sample lighthouse data Tide information Date window Map, port service displayTide window Working with Track Displaying trackOwn ship track Track control menu Stopping, restarting plotting of own ship track Target tracks Changing track color Own ship’s trackOwn ship track color window Target track Track plotting method and interval for own ship track Track plotting methodInterval window Track plotting interval Changing own ship track/mark distribution setting Track memory window Erase menu Erasing trackErasing own ship track by area Erasing own ship track by color Erase track by color windowErasing all own ship track Erasing all target tracks Marks, Lines Entering a mark, lineChanging mark attributes Marks & lines menu Selecting line type Marks shape windowSelect Lines STYLE, then press the Aedit soft key Lines style window Erasing marks, lines Erasing an individual markErasing an individual line Erasing marks, lines by area Waypoints Entering waypointsEntering a waypoint at own ship position Entering a waypoint with the cursor Waypoint mark shape selection window Waypoint mark color selection window Entering a waypoint by range and bearing Editing waypoint data Entering a waypoint from the waypoint listAlphanumeric and local waypoint lists Editing waypoint data from the waypoint list Editing a waypoint from the plotter display Plotter display Erasing waypoints Erasing a waypoint directly from the plotter displayErasing a waypoint from the menu Erasing a waypoint from the waypoint list Changing waypoint mark size FURUNO, NavCharts Chart details menu Searching waypoints Alphanumeric list Routes Creating routesEntering a route with existing waypoints Route menu New route entry screen Entering a route with the cursor Save route window Creating voyage-based routesSave route menu To stop recording waypoints and save the route Displays for entry of time, distance intervalFor manual entry of waypoints, do the following Connecting routes Connect route window Inserting waypoints Inserting a waypoint from the route listEdit route menu Waypoint list for editing a route local list Inserting a waypoint from the plotter display Inserting a waypoint in an intermediate location on a route Removing waypoints from a route Erasing routesRemoving a waypoint from the route list Removing a waypoint from the plotter display Navigation Navigating to a quick pointSelecting quick point entry method Go to method window Navigating to waypoints Navigating to multiple quick pointsSelecting a waypoint from the plotter display Selecting a waypoint from the waypoint list QP window Navigating to ports, port services NavCharts/C-MAPSelecting an external waypoint Port services and sample port list Sample filling station locations southern Italy Following a route Selecting the route to followPlotter display, route selected as destination Navigating waypoints in reverse order Log display Example of when to restart navigationRestarting navigation Setting speed for ETA calculation Switching waypointsAutomatic waypoint switching methods Select speed for ETA window Canceling route navigation Alarms Audio alarm on/offPlotter alarm menu Audio alarm window Arrival alarm window Arrival alarmHow the arrival alarm works Anchor watch alarm window Anchor watch alarmHow the anchor watch alarm works XTE Cross-Track Error alarm Speed alarmHow the XTE alarm works XTE alarm window Proximity mark Proximity alarmProximity alarm window Trip alarm Trip alarm window Alarm information Plotter alarm menu, Message Meaning Alarm messagesPlotter alarm messages and their meanings Resetting Trip Distance General setup menu, Principle of Operation Underwater conditions and video sounder display Selecting a sounder display Display mode windowSounder Displays Description of sounder displays Single-frequency displayIndications on the single frequency display Selecting transmission frequency Dual-frequency display Dual-frequency display LF pictureHF picture Sounding area and transmission frequency Bottom-zoom display plus normal sounder display Marker-zoom display plus normal sounder displayBottom-zoom display Bottom-lock display Bottom-lock display plus normal sounder display Bottom discrimination display Bottom discrimination displayScope display display only Scope display Selecting screen split method in combination displays How to enable automatic sounder operation Automatic Sounder OperationHow the automatic sounder works Types of automatic sounder modes Selecting the manual mode Adjusting the gainManual Sounder Operation Selecting display range Shift concept Shifting the rangeGain window How to measure depth and time Measuring Depth, Time Noise limiter window Reducing InterferenceTypes of interference Clutter window Reducing Low Level NoiseAppearance of clutter Appearance of weak echoes Signal level windowErasing Weak Echoes White marker window Color bar 16 color when white marker function is activeWhite Marker Picture advance window Picture Advance SpeedAdvancement independent of ship’s speed How the speed-dependent picture advance mode works Advancement synchronized with ship’s speed Hue No Echo Color Background Color Display ColorsHue no. and background and echo colors Sounder alarm menu Alarm audio window Bottom alarm Fish alarmBottom alarm window Fish alarm window Fish alarm B/L Fish alarm B/L window Water temperature alarm Water temperature alarm window When an alarm setting is violated Depth Alarm Water Temperature Graph Sounder alarm messages and their meanings Changing Pulse Repetition Rate Interpreting the Sounder Display Zero lineBottom echo Zero line Fish school echoes Surface noise/AerationFish school echoes Surface noise/aeration General Setup General setup menu Contents of general setup menu Radar display setup menu Radar SetupRadar display setup Contents of radar display setup menu Con’t on next Contents of radar display setup menu con’t from previous Model Maximum Range Radar range setupRadar range setup menu Function key setup Function Key Default Function Function Key LabelRadar function key menu Radar function key options Radar function keys Menu Item Function Function Key Navigation options Plotter SetupPlotter setup menu Contents of plotter setup menu Function Default Function Function Key Label Plotter function key menu Plotter function keys Plotter display, chart offset selected Chart SetupChart offset FURUNO, NavCharts chart attributes Chart details menu FURUNO, NavCharts Contents of chart details menu FURUNO, NavCharts MAP chart attributes Contour line menu FURUNO, NavChartsChart details menu C-MAP Bcntour Line soft key Contents of chart details menu C-MAP Settings description Adepth Info soft key Data Boxes Setup Data box menu Hot Page Setup Hot page setup menu Hot page setup menu, Split X 3 screen, sub screen selection HOT Navigation data source Navigator SetupContents of nav setup menu GPS receiver setup Set equipped with GP-310B/320B GPS setup menu Contents of GPS setup menu Contents of GPS setup menu con’t from previous Bgps Waas Setup Contents of Waas Setup menu TD display setup TD setup menuDisplaying Loran C TDs Loran GRI & station pair window Displaying Decca TDs Decca chain and station pair window Nav data setup window Nav Data Display SetupNav data setup screen Sounder Setup System setupSounder system setup menu Sounder system setup menu description Sounder system setup menu description con’t from previous SM1-SM4, OFF Sensor setup menu settings Sensor setupSensor setup menu Sounder range setup menu Default basic rangesSounding range, zoom range, bottom lock range Zoom range and bottom-lock ranges Sounder function key options Function Default Function Function KeySounder function key menu Sounder function keys Save data menu Memory Card OperationsFormatting memory cards Saving data to a memory card Message Reason Remedy Memory card messagesMemory card messages Playing back data from a memory card Load data menu Receiving Data Via Network Equipment Receive data menuHost name window Marks & lines window Outputting Data Through the Network Select sentence menu Preventive Maintenance ReplacementReplacement of the battery Maintenance program Replace of the synchro belt Replacement of the fuseReplacement of the magnetron Trackball Maintenance Part Type Code No Retainer ring and ball MU3721 000-144-645 Simple Troubleshooting General troubleshootingRadar troubleshooting Radar Plotter troubleshooting Plotter Sounder troubleshooting Sounder Memory I/O Test menu DiagnosticsMemory I/O test Processor unit test Processor unit test resultsGPS sensor test Requires GPS Receiver GP-310B/320B GPS receiver test results Network sounder test results ARP test results Test pattern Test pattern sequence Screen for testing keyboard, remote controller Keyboard test of the control unit GPS Status Display GPS status display Windows for clearing memory Clearing MemoriesMemory clear menu Error Message Meaning Remedy Error MessagesError messages Menu Overview Menu key AP-2 AP-3 AP-4 AP-5 AP-6 AP-7 AP-8 Alarm key Radar AlarmsPlotter Alarms Sounder Alarms Geodetic Chart List World Time Chart Icons Icon Meaning What is WAAS? Waas This page is intentionally left blank OfferedSP 1by Busse-Yachtshop.de OfferedSP 2by Busse-Yachtshop.de OfferedSP 3by Busse-Yachtshop.de OfferedSP 4by Busse-Yachtshop.de Specifications of Video Plotter GD-1900C-BB OfferedSP 6by Busse-Yachtshop.de Index Index-2 Index-3 Index-4 Index-5 Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de