Alarms, Audio alarm on/off, Plotter alarm menu | Furuno 1943C-BB

3. PLOTTER OPERATION

3.11Alarms

The plotter section has eight conditions which generate both audio and visual alarms: arrival alarm, anchor watch alarm, XTE (Cross Track Error) alarm, proximity alarm, speed alarm, trip alarm, water temperature alarm and bottom alarm. (The bottom and water temperature alarms, which require depth and water temperature data, may also be set on the sounder alarm menu. For these alarms see Chapter 4.)

You may set up the plotter alarms on the ALARM menu, which may be displayed by pressing the [ALARM] key.

AUDIO ALARM	INTERNAL BUZZ
ARRIVAL ALARM	OFF 0.010nm
ANCHOR WATCH ALARM	OFF 0.010nm
PROXIMITY ALARM	OFF
XTE ALARM	OFF 0.050nm
SPEED ALARM	OFF
TRIP ALARM	OFF 0000.0nm

ALARM1

A EDIT

CCLEAR ALARM

DNEXT PAGE

BOTTOM ALARM	OFF
TEMPERATURE ALARM	OFF

ALARM2

A EDIT

CCLEAR ALARM

ALARM INFORMATION	D	NEXT
NO ALARM		PAGE
NO ALARM

E RETURN

EPREV.

PAGE

ALARM INFORMATION NO ALARM

EPREV.

PAGE

Page 1

Page 2

Plotter alarm menu

3.11.1Audio alarm on/off

Audio and visual alarms are released whenever an alarm setting is violated. You can enable or disable the audio alarm as follows:

1.Press the [ALARM] key to show the alarm menu.

2.Use the trackball to select AUDIO ALARM.

3.Press the A:EDIT soft key to show the audio alarm window.

AUDIO ALARM

§INT & EXT BUZZ °INTERNAL BUZZ

OFF

Audio alarm window

4.Use the trackball to select INT & EXT BUZZ (Internal + External alarm), INTERNAL BUZZ (Internal alarm) or OFF as appropriate. This turns on or off the audio alarm globally for all alarms, including radar.

5.Press the C:ENTER soft key.

6.Press the [ALARM] key to finish.

3-52	offered by Busse-Yachtshop.de

Image 134

Furuno 1943C-BB, FURUNO MARINE RADAR, 1953C-BB, 1933C-BB Alarms, Audio alarm on/off, Plotter alarm menu, Audio alarm window

Contents

Offered by Busse-Yachtshop.de 00014749700 Safety Instructions Table of Contents Iii Plotter Operation Video Sounder Operation Customizing Your Unit MAINTENANCE, Troubleshooting Vii Foreword Viii Features Model Output Range Radar System Configurations Single-unit NavNet system GD-1900C-BB Single-unit NavNet system GD-1900C-BB Two-unit NavNet system XiiTwo-unit NavNet system Three-or-more-unit NavNet Operational Overview Control unit Operating ControlsOverview of control unit Soft keys Radar and plotter displays Processor unit Inserting a Chart CardChart card and card remover Turning the Unit On/Off Startup sequence Night Day Twilight Adjusting Hue, Panel IlluminationHue window Panel brilliance windows Selecting a DisplayDisplay modes Display screens Radar combination screen selection window Selecting a displayDisplay screen selection window Switching control in combination and overlay screens To adjust plotter Radar source and sounder source windows Selecting image sourceSelect source menu Trackball, Cursor Cursor, cursor data MOB mark messages Entering the MOB Mark, Setting MOB as DestinationMOB concept Data boxes Data BoxesShowing, hiding data boxes with soft key Rearranging data boxes Temporarily erasing a data box Executing a function Function Default Setting, Key LabelFunction Keys Simulation setup menu Simulation Display Plotter RadarNavNet processor unit-generated echoes Sounder Radar Display Radar display Tuning window TuningAdjusting the Gain Transmitting, Stand-by Gain adjustment soft key Gain sensitivity window Reducing Sea Clutter Adjusting the A/C SEASEA setting window How the A/C SEA works Reducing Precipitation Clutter Adjusting the A/C RainRain setting window Range scales km Range ScaleRange scales nm, sm Signal process soft keys Pulselength Radar display soft keys Presentation ModeSelecting a presentation mode Description of presentation modes Head-up presentation modeCourse-up presentation mode Head-up North-up North-up presentation modeTrue motion presentation mode True motion Measuring the Range Measuring range by range rings Measuring range by VRM How to measure range to a target with the cursorMeasuring range by cursor EBL/VRM soft keys Erasing VRM data boxes How to measure range with the VRMErasing a VRM, VRM indication Hiding VRM data boxes Measuring bearing by cursor How to measure bearing with the EBLMeasuring the Bearing Measuring bearing by EBL Moving EBL data boxes Erasing EBL data boxesHiding EBL data boxes Erasing the Heading Line, North Marker Reducing Noise Interference Rejecting Radar Interference Radar interference Zooming in on ARP, TTM targets ZoomZooming in on radar targets Zoom Target no. selection window Shifting the PictureManual shift Shifting the picture manually Automatic shift Setting automatic shift maximum speedAuto ship speed setting window Automatic shift Predicting collision course with the offset EBL Using the Offset EBLPredicting collision course Measuring range & bearing between two targets Measuring range and bearing between two targets Sample echo trails Echo TrailsTrail time Trail soft keys Multitone and monotone trails Starting echo trailsTrail gradation Trail color Echo trail modeTrail mode window Trail color window Echo Stretch Types of echo stretch Echo Averaging Effect of echo averaging Outputting TLL Data Target soft keys How to set a guard alarm zone Guard AlarmSetting a guard alarm zone When the alarm is violated… Canceling the guard alarm How watchman works Setting watchman stand-by intervalWatchman Turning on/off watchman Suppressing Second-trace Echoes Second-trace echoes Waypoint Marker Waypoint marker Usage precautions for ARP 26 ARP, TTM Operation ARP target info window ARP setup menuActivating/deactivating ARP, TTM Manual acquisition ARP plot symbolsAcquiring and tracking targets ARP Automatic acquisition ARP target number Displaying target number ARP, TTMAutomatic acquisition area Terminating tracking of selected targets Cancel all targets windowTerminating tracking of ARP targets Terminating tracking of all targets Vector reference, vector time Setting vector attributes ARPWhat is a vector? History interval window Displaying past position ARPPast position displays 26.7 ARP, TTM target data ARP target data 26.8 CPA/TCPA alarm ARP CPA window Tcpa window Lost target alarm ARPCanceling a lost target Lost target mark Minimum and maximum ranges Interpreting the Radar DisplayGeneral Range resolution Radar resolutionBearing resolution Bearing accuracy Multiple echoes False echoesMultiple echoes Sidelobe echoes Shadow sectors Virtual imageVirtual image Shadow sectors Appearance of Sart signal on the radar display Sart Search and Rescue Transponder General procedure for detecting Sart response General remarks on receiving Sart SEA control Appearance of racon signal on the radar displayRacon Radar Beacon Rain control Full-screen plotter display Plotter DisplaysFull-screen plotter display Contents of nav data window Nav data window Compass display Compass display XTE range setting window Reading the XTE cross-track error monitorSetting the range for the XTE monitor Highway display Highway display Nav data display Nav data displays Plotter display, north-up mode North-up Auto course-up Plotter display, auto course-up modeCourse-up Plotter display, course-up mode, destination set Shifting the Display Chart ScaleCharts scales Chart icons and their meanings Chart CardsChart card overview When a chart cannot be displayed Indices and chart enlargementSample chart Japan, showing indices Data for aids to navigation Furuno and NavCharts chartsChart symbols Current or tide data Port service iconsPlotter display, showing port service display Current data display Objects window MAP chartsCursor and data display Example of caution area window Object windows Icon dataLighthouse icon Sample lighthouse data Tide information Date window Map, port service displayTide window Own ship track Working with TrackDisplaying track Track control menu Stopping, restarting plotting of own ship track Target tracks Own ship track color window Changing track colorOwn ship’s track Target track Interval window Track plotting method and interval for own ship trackTrack plotting method Track plotting interval Changing own ship track/mark distribution setting Track memory window Erase menu Erasing trackErasing own ship track by area Erasing all own ship track Erasing own ship track by colorErase track by color window Erasing all target tracks Changing mark attributes Marks, LinesEntering a mark, line Marks & lines menu Select Lines STYLE, then press the Aedit soft key Selecting line typeMarks shape window Lines style window Erasing an individual line Erasing marks, linesErasing an individual mark Erasing marks, lines by area Entering a waypoint at own ship position WaypointsEntering waypoints Entering a waypoint with the cursor Waypoint mark shape selection window Waypoint mark color selection window Entering a waypoint by range and bearing Alphanumeric and local waypoint lists Editing waypoint dataEntering a waypoint from the waypoint list Editing waypoint data from the waypoint list Editing a waypoint from the plotter display Plotter display Erasing a waypoint from the menu Erasing waypointsErasing a waypoint directly from the plotter display Erasing a waypoint from the waypoint list Changing waypoint mark size FURUNO, NavCharts Chart details menu Searching waypoints Alphanumeric list Entering a route with existing waypoints RoutesCreating routes Route menu New route entry screen Entering a route with the cursor Save route window Creating voyage-based routesSave route menu To stop recording waypoints and save the route Displays for entry of time, distance intervalFor manual entry of waypoints, do the following Connecting routes Connect route window Edit route menu Inserting waypointsInserting a waypoint from the route list Waypoint list for editing a route local list Inserting a waypoint from the plotter display Inserting a waypoint in an intermediate location on a route Removing a waypoint from the route list Removing waypoints from a routeErasing routes Removing a waypoint from the plotter display Selecting quick point entry method NavigationNavigating to a quick point Go to method window Selecting a waypoint from the plotter display Navigating to waypointsNavigating to multiple quick points Selecting a waypoint from the waypoint list QP window Navigating to ports, port services NavCharts/C-MAPSelecting an external waypoint Port services and sample port list Sample filling station locations southern Italy Plotter display, route selected as destination Following a routeSelecting the route to follow Navigating waypoints in reverse order Log display Example of when to restart navigationRestarting navigation Automatic waypoint switching methods Setting speed for ETA calculationSwitching waypoints Select speed for ETA window Canceling route navigation Plotter alarm menu AlarmsAudio alarm on/off Audio alarm window Arrival alarm window Arrival alarmHow the arrival alarm works Anchor watch alarm window Anchor watch alarmHow the anchor watch alarm works How the XTE alarm works XTE Cross-Track Error alarmSpeed alarm XTE alarm window Proximity mark Proximity alarmProximity alarm window Trip alarm Trip alarm window Alarm information Plotter alarm menu, Message Meaning Alarm messagesPlotter alarm messages and their meanings Resetting Trip Distance General setup menu, Principle of Operation Underwater conditions and video sounder display Selecting a sounder display Display mode windowSounder Displays Indications on the single frequency display Description of sounder displaysSingle-frequency display Selecting transmission frequency HF picture Dual-frequency displayDual-frequency display LF picture Sounding area and transmission frequency Bottom-zoom display plus normal sounder display Marker-zoom display plus normal sounder displayBottom-zoom display Bottom-lock display Bottom-lock display plus normal sounder display Scope display display only Bottom discrimination displayBottom discrimination display Scope display Selecting screen split method in combination displays How the automatic sounder works How to enable automatic sounder operationAutomatic Sounder Operation Types of automatic sounder modes Manual Sounder Operation Selecting the manual modeAdjusting the gain Selecting display range Shift concept Shifting the rangeGain window How to measure depth and time Measuring Depth, Time Noise limiter window Reducing InterferenceTypes of interference Clutter window Reducing Low Level NoiseAppearance of clutter Appearance of weak echoes Signal level windowErasing Weak Echoes White marker window Color bar 16 color when white marker function is activeWhite Marker Picture advance window Picture Advance SpeedAdvancement independent of ship’s speed How the speed-dependent picture advance mode works Advancement synchronized with ship’s speed Hue No Echo Color Background Color Display ColorsHue no. and background and echo colors Sounder alarm menu Alarm audio window Bottom alarm window Bottom alarmFish alarm Fish alarm window Fish alarm B/L Fish alarm B/L window Water temperature alarm Water temperature alarm window When an alarm setting is violated Depth Alarm Water Temperature Graph Sounder alarm messages and their meanings Changing Pulse Repetition Rate Bottom echo Interpreting the Sounder DisplayZero line Zero line Fish school echoes Fish school echoesSurface noise/Aeration Surface noise/aeration General Setup General setup menu Contents of general setup menu Radar display setup menu Radar SetupRadar display setup Contents of radar display setup menu Con’t on next Contents of radar display setup menu con’t from previous Model Maximum Range Radar range setupRadar range setup menu Radar function key menu Function key setupFunction Key Default Function Function Key Label Radar function key options Radar function keys Menu Item Function Function Key Navigation options Plotter SetupPlotter setup menu Contents of plotter setup menu Function Default Function Function Key Label Plotter function key menu Plotter function keys Plotter display, chart offset selected Chart SetupChart offset FURUNO, NavCharts chart attributes Chart details menu FURUNO, NavCharts Contents of chart details menu FURUNO, NavCharts Chart details menu C-MAP MAP chart attributesContour line menu FURUNO, NavCharts Bcntour Line soft key Contents of chart details menu C-MAP Settings description Adepth Info soft key Data Boxes Setup Data box menu Hot Page Setup Hot page setup menu Hot page setup menu, Split X 3 screen, sub screen selection HOT Navigation data source Navigator SetupContents of nav setup menu GPS receiver setup Set equipped with GP-310B/320B GPS setup menu Contents of GPS setup menu Contents of GPS setup menu con’t from previous Bgps Waas Setup Contents of Waas Setup menu Displaying Loran C TDs TD display setupTD setup menu Loran GRI & station pair window Displaying Decca TDs Decca chain and station pair window Nav data setup window Nav Data Display SetupNav data setup screen Sounder system setup menu Sounder SetupSystem setup Sounder system setup menu description Sounder system setup menu description con’t from previous SM1-SM4, OFF Sensor setup menu settings Sensor setupSensor setup menu Sounding range, zoom range, bottom lock range Sounder range setup menuDefault basic ranges Zoom range and bottom-lock ranges Sounder function key options Function Default Function Function KeySounder function key menu Sounder function keys Save data menu Memory Card OperationsFormatting memory cards Saving data to a memory card Message Reason Remedy Memory card messagesMemory card messages Playing back data from a memory card Load data menu Host name window Receiving Data Via Network EquipmentReceive data menu Marks & lines window Outputting Data Through the Network Select sentence menu Replacement of the battery Preventive MaintenanceReplacement Maintenance program Replace of the synchro belt Replacement of the fuseReplacement of the magnetron Trackball Maintenance Part Type Code No Retainer ring and ball MU3721 000-144-645 Radar troubleshooting Simple TroubleshootingGeneral troubleshooting Radar Plotter troubleshooting Plotter Sounder troubleshooting Sounder Memory I/O Test menu DiagnosticsMemory I/O test GPS sensor test Requires GPS Receiver GP-310B/320B Processor unit testProcessor unit test results GPS receiver test results Network sounder test results ARP test results Test pattern Test pattern sequence Screen for testing keyboard, remote controller Keyboard test of the control unit GPS Status Display GPS status display Windows for clearing memory Clearing MemoriesMemory clear menu Error Message Meaning Remedy Error MessagesError messages Menu Overview Menu key AP-2 AP-3 AP-4 AP-5 AP-6 AP-7 AP-8 Plotter Alarms Alarm keyRadar Alarms Sounder Alarms Geodetic Chart List World Time Chart Icons Icon Meaning What is WAAS? Waas This page is intentionally left blank OfferedSP 1by Busse-Yachtshop.de OfferedSP 2by Busse-Yachtshop.de OfferedSP 3by Busse-Yachtshop.de OfferedSP 4by Busse-Yachtshop.de Specifications of Video Plotter GD-1900C-BB OfferedSP 6by Busse-Yachtshop.de Index Index-2 Index-3 Index-4 Index-5 Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de